产品资料
  首页 >>> 产品目录 >>> 测量仪表

韓國DacelI仪表|放大器DN-AM1000

如果您对该产品感兴趣的话,可以
产品名称: 韓國DacelI仪表|放大器DN-AM1000
产品型号: 放大器DN-AM1000
产品展商: 韩国dacell
产品文档: 无相关文档

简单介绍

韓國DacelI仪表|放大器DN-AM1000.深圳市世泰瑞尔工业仪器仪表有限公司代理销售,韓國DacelI仪表|放大器DN-AM1000


韓國DacelI仪表|放大器DN-AM1000  的详细介绍
韓國DacelI仪表|放大器DN-AM1000

  • SPECIFICATIONS
Specifications Accuracy
EXCITATION 5 steps : 1V, 2V, 5V, 7.5V, 10V
Current : 170mA, max.
Remote sence error : 0.0005%/Ω at lead resistance (350Ω load)
Noise and ripple : 0.05% p-p, max (dc 10kHz)
Stability : ± 0.02%/℃
INPUT STRAIN GAUGE :
  quarter, half or full bridge (50~1000Ω)
  Built-in 120Ω and 350Ω dummy resister
TRANSDUCER :
  Piezoresistive strain gauge types,potentiometer,DCDT transducers displacement.
AMPLIFIER 1st Gain : ×1, ×10, ×100, ×400, ×1000 5steps (accuracy ±1%)
2nd Gain : ×1~×11 continuously variable
Vernier multiplier : 10-turn counting knob with direct readout (×1~×11)
Fine Adjust
Frequence response : 100kHz (-3dB), max
Input resistance : 1GΩ, differential or common mode
Input capacitance : 4pF, differential or common mode
Input voltage range :
  ± 10V, differential mode
  12V-(G/2× Vd), common mode (Vd = actual differential input voltage)
Bias current : ± 30nA, typical, each input
Common-mode rejection (G=100) : 100dB, min, dc to 60Hz with 1kΩ source imbalance
Stability (G<1000) : 5ppm/℃, max
Noise (G=100) : 0.01~10Hz, 0.3μVp-p R.T.I
FILTER Characteristic : low-pass active 2-pole Butterworth standard
Frequencies (-3dB) : 10Hz, 100Hz, 1kHz, 10kHz, wide-band
AMPLIFIER OUTPUT
(BNC CONNECTOR)
Output 1 : ±10V @100mA max
Output 2 ; ±10V @10mA max
Linearity : ±0.01%
VOLTAGE DISPLAY Display character : 7-segment 4-digits LED
Display range : 0.000V ~ ± 10.00V
GAIN 5 steps Amplilfier (x1, x10, x100, x400, x1000)
FREQUENCY RESPONSE 100kHz (-3dB), Max
BRIDGE BALANCE Auto ranging : ± 4000με (2mV/V)
Auto balance time : 1 second, typical
Manual balance range : ± 1V
Storage : non-volatile data memory (EEPROM)
LOW PASS FILTER
 
4 steps 10Hz, 100Hz, 1kHz, 10kHz (-3dB)
LINEARITY ±0.01%
STABILITY ±0.01%℃
SHUNT CALIBRATION Bridge resistance 120Ω : 200με and 2000με calibrations
Bridge resistance 350Ω : 200με and 2000με calibrations
INPUT IMPEDANCE
 
more than 1GΩ
POWER AC 110V or 220V (switch selected), 50/60Hz, 7.5watts
3-wirecode ( 2-wire : power / 1-wire : Ground)

 
  • DIMENSIONS
  • SPECIFICATIONS
Specifications Accuracy
EXCITATION 5 steps : 1V, 2V, 5V, 7.5V, 10V
Current : 170mA, max.
Remote sence error : 0.0005%/Ω at lead resistance (350Ω load)
Noise and ripple : 0.05% p-p, max (dc 10kHz)
Stability : ± 0.02%/℃
INPUT STRAIN GAUGE :
  quarter, half or full bridge (50~1000Ω)
  Built-in 120Ω and 350Ω dummy resister
TRANSDUCER :
  Piezoresistive strain gauge types,potentiometer,DCDT transducers displacement.
AMPLIFIER 1st Gain : ×1, ×10, ×100, ×400, ×1000 5steps (accuracy ±1%)
2nd Gain : ×1~×11 continuously variable
Vernier multiplier : 10-turn counting knob with direct readout (×1~×11)
Fine Adjust
Frequence response : 100kHz (-3dB), max
Input resistance : 1GΩ, differential or common mode
Input capacitance : 4pF, differential or common mode
Input voltage range :
  ± 10V, differential mode
  12V-(G/2× Vd), common mode (Vd = actual differential input voltage)
Bias current : ± 30nA, typical, each input
Common-mode rejection (G=100) : 100dB, min, dc to 60Hz with 1kΩ source imbalance
Stability (G<1000) : 5ppm/℃, max
Noise (G=100) : 0.01~10Hz, 0.3μVp-p R.T.I
FILTER Characteristic : low-pass active 2-pole Butterworth standard
Frequencies (-3dB) : 10Hz, 100Hz, 1kHz, 10kHz, wide-band
AMPLIFIER OUTPUT
(BNC CONNECTOR)
Output 1 : ±10V @100mA max
Output 2 ; ±10V @10mA max
Linearity : ±0.01%
VOLTAGE DISPLAY Display character : 7-segment 4-digits LED
Display range : 0.000V ~ ± 10.00V
GAIN 5 steps Amplilfier (x1, x10, x100, x400, x1000)
FREQUENCY RESPONSE 100kHz (-3dB), Max
BRIDGE BALANCE Auto ranging : ± 4000με (2mV/V)
Auto balance time : 1 second, typical
Manual balance range : ± 1V
Storage : non-volatile data memory (EEPROM)
LOW PASS FILTER
 
4 steps 10Hz, 100Hz, 1kHz, 10kHz (-3dB)
LINEARITY ±0.01%
STABILITY ±0.01%℃
SHUNT CALIBRATION Bridge resistance 120Ω : 200με and 2000με calibrations
Bridge resistance 350Ω : 200με and 2000με calibrations
INPUT IMPEDANCE
 
more than 1GΩ
POWER AC 110V or 220V (switch selected), 50/60Hz, 7.5watts
3-wirecode ( 2-wire : power / 1-wire : Ground)

 
  • DIMENSIONS



韓國DacelI仪表|放大器DN-AM1000

深圳市世泰瑞尔工业仪器仪表有限公司    www.ntssensor.com
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

粤公网安备 44030602001747号